Uni Klinger Valves
Dealer, Supplier and Exporter of Uni Klinger Valves
Uni Klinger Ltd – Safety Valves & Control Valves division manufactures safety & pressure relief valve under a license M/s AST SpA Italy to meet the API & ASME requirements at our state of the art manufacturing facility at Sanaswadi-Pune (Maharashtra).
Enhancing Uni Klinger commitment towards environment protection, Fluid Control Division has added Bellow Sealed Valves to comply with stringent fugitive emission, environment protection laws, NACE certification and nuclear requirements.
Features:
- Single piece stem and plug assembly.
- Non Rotating Stem design.
- Rising Stem non rising hand wheel .
- Roller Burnishing of Stem in Gland Packing section.
- Special Control Cone (SN 46)for use on Pressure Equalizing application and high pressure reduction/Throttling applications.
- Petroleum, Power Generation, Chemicals, Fertilizer, Steel industry, Isolation Drain, Shut-Off Valves, Feed Water and Steam
UNI KLINGER UKL HIGH PRESSURE GATE GATE VALVES
UNI KLINGER UKL HIGH PRESSURE GATE GATE VALVES
UKL High Pressure Gate and Globe Valves are manufactured to the latest International designs, using latest, State of the Art technology and a strict quality control system by Uni Klinger.
Application Industries: Power Stations, Thermal & Cogeneration Power Plants, Nuclear Power Plants, Petrochemical ,Chemical, Process and other General Industries, Sugar, Refineries , Fertilizers, Steel, Off-Shore &On-Shore Platforms.
- Ends: 15mm to 40mm
- Materials. ( as per ASME B-16.34 ): # 1500 , # 2500 in A-216 WCB for temperature 0o C to 425deg. C
UNI KLINGER UKL MAKE PISTON VALVE
UNI KLINGER UKL MAKE PISTON VALVE
UKL Piston Valve is basically Seat less and Glandless valve and by virtue of its design can replace both, the conventional type of Gate and Globe valves, with distinct advantages over them.
UKL piston valves are ideally recommended for critical and hazardous media, including Steam, Heat Transfer Oils, Acids, Gases, VACUUM.
- Size (NB) : 15 to 40
- Max. Op. Pr / Temp (kg/cm2 / oC): 55 / 427
UNI KLINGER UKL MAKE THERMODYNAMIC STEAM TRAP
UNI KLINGER UKL MAKE THERMODYNAMIC STEAM TRAP
The Thermodynamic Trap works on the principle of difference in the velocities of Steam and Condensate.
Used Mainly on Drip lines of the main steam distribution line, uses condensate pressure to open the trap and discharge the condensate and then the Flash steam formed due to the high flash steam velocity & accumulation of flash steam over disc, Device close and trap the live steam when it appears..
- Size (NB) : 15 & 20
- Max. Op. Pr / Temp (kg/cm2 / oC): 42 / 454